What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 27.06.2025 08:39
It seems Mohan does not understand the difference between a comment and an Answer.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Why should the law care about what I do behind closed doors?
The other is “what does a “fuse” do?”
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
He then describes the function of a fuse.
In schematic diagrams this is the symbol for a fuse:
He then describes Rainy Season and Lightning.
These devices are installed between the “hot” and “neutral” and protective ground.
but I think this circuit , shows a few more pieces.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Upvotes:
Why do some of those who believe in a god refuse to consider the possibility they could be wrong?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
a photo is worth a thousand words.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
6 early symptoms of fatty liver: What your body is telling you now - Times of India
Here is a simplified AC power diagram.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Microsoft Confirms Password Deletion—Now Just 8 Weeks Away - Forbes
The MOV will conduct when the voltage exceeds 50% of line voltage.
eight
[image of Common-mode choke]
At one ohm, the resistor has a maximum of 1 watt power.
Now when you have a certain ac resistance, then a current flows in a loop.
At least they know the answer if they wanted it.
Junk Food Alert: Our Bodies Treat Ultra-Processed Foods Like Foreign Invaders! - Glass Almanac
(Dc diagram shown, AC is similar).
This one hit behind the barn.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Washington governor activates National Guard in search for accused killer, Travis Decker - KATU
What does a fuse do?
What is lightning?
One is “what exactly is in a ‘surge protector’ ? ”
NCAA approves multiple major rule changes in men's college basketball - On3.com
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
It also is a device that limits the change in current flow.
A circuit breaker is similar, but is resettable.
There are three different concepts here that are getting confused.
The bolt then partially travels down the line to your home.
But… the neutral is now “floating” because of the 1 ohm resistance.
Google Confirms Most Gmail Users Must Upgrade All Their Accounts - Forbes
Barnstars:
There are two important concepts here.
For this case there are devices called Metal oxide varistors (MOV).
Bank of America predicts major housing market changes are coming soon - TheStreet
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
This is 'the assistant's answer'
First Sentence:
McDonald’s to suffer massive boycott from customers - TheStreet
2024–10–14 [Omar Gharbi Omar Gharbi ]
but this device (an Inductor) … impedes the rapid changes in the current.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
nine
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This is where this question deviates from being a 'generic' question, and becomes more specific.
2024–10–16 [ OO OLAOYE OYEBODE ]
the problem then depends on "how fast does the fuse operate?".
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Because the load is inductive, the current lags the voltage.(by a bit).
These are simplified answers to the original question, and does not change anything I wrote above.
This device then solves the entire problem.
But it can get overloaded, and no longer works.
so, what happens?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
An AC voltage/ current source, and an ac inductive load.
2024–10–10[John johnson John Johnson ]
The third is lightning and “how it gets conducted into a home.”
So, the voltage could go up to 500 volts, and the fuse will not open up.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
One
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
[old diagram got deleted by accident]
Edit 2024–10.
I post the exact comment here.
He then asserts :
A fuse is a non-resetable over current circuit protector.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
what exactly is a ‘surge’ protector?
This is where the MOV conducts again, and dissipated the energy.